 |
Part Number |
Description |
Comments |
Principal
Application |
Element
to be Converted |
Spin-On
Replacement |
|
| |
4001 |
Hydraulic Installation
Kit |
For fluid flow
rates up to 12 gallons per minute, with a maximum
working pressure of 100 psi. |
|
|
|
|
| |
4034 |
Hydraulic Installation
Kit |
For fluid flow
rates up to 12 gallons per minute, with a maximum
working pressure of 100 psi. |
|
|
|
|
| |
4061 |
Base, Gasket, and
Mounting Bolts |
|
Chevrolet Cars/Trucks
1956-67 |
1129 |
1794 |
|
| |
4067 |
Lube Filter Conversion
Kit |
The kit includes
an adapter plate, sealing gasket, washers, and instruction
sheet. A cap screw (bolt) is not supplied with this
kit. All cap screws should be Grade 5, 5/8"-18 UNF-2A. |
Cummins Diesel
Engines |
|
|
|
| |
4123 |
Base, Threaded
Bushing and Gaskets (Bushings - 3/4-16 x 3/4-24) |
|
Ford Cars/Trucks |
1004, 1271 (Verticle
Base Mounted) |
1515, 1773 |
|
| |
4124 |
Base, Threaded
Bushing and Gaskets (Bushings - 3/4-16 x 3/4-16) |
|
Ford Cars/Trucks |
1004, 1271 (Verticle
Base Mounted) |
1515, 1773 |
|
| |
4730 |
Adapters For Converting
Engine Mounted Filters To Remote Mounted Base |
Each adapter has
a female thread to mate with the engine male thread
stud. Two 1/2" N.P.T. female threaded ports are used
for connecting for the flexible oil lines. O-ring
sealing gaskets are included with each adapter. |
|
|
|
|
| |
4732 |
Adapters For Converting
Engine Mounted Filters To Remote Mounted Base |
Each adapter has
a female thread to mate with the engine male thread
stud. Two 1/2" N.P.T. female threaded ports are used
for connecting for the flexible oil lines. O-ring
sealing gaskets are included with each adapter. |
|
|
|
|
| |
4734 |
Adapters For Converting
Engine Mounted Filters To Remote Mounted Base |
Each adapter has
a female thread to mate with the engine male thread
stud. Two 1/2" N.P.T. female threaded ports are used
for connecting for the flexible oil lines. O-ring
sealing gaskets are included with each adapter. |
|
|
|
|
| |
4736 |
Adapters For Converting
Engine Mounted Filters To Remote Mounted Base |
Each adapter has
a female thread to mate with the engine male thread
stud. Two 1/2" N.P.T. female threaded ports are used
for connecting for the flexible oil lines. O-ring
sealing gaskets are included with each adapter. |
|
|
|
|
| |
4738 |
Adapters For Converting
Engine Mounted Filters To Remote Mounted Base |
|
|
|
|
|
| |
4750 |
Lube Filter Conversion
Kits By-Pass Filter For Small Gas And Diesel Engines |
Small engine equipped
with cartridge type by-pass filters can be converted
to the convenience of a spin-on with this kit. The
kit may also be used to add-on supplemental bypass
filtration to provide increased engine protection.
A choice of three different sized filters are available. |
|
|
|
|
| |
4755 |
Lube Filter Conversion
Kits By-Pass Filter For Small Gas And Diesel Engines |
Small engine equipped
with cartridge type by-pass filters can be converted
to the convenience of a spin-on with this kit. The
kit may also be used to add-on supplemental bypass
filtration to provide increased engine protection.
A choice of three different sized filters are available. |
Use with 1749 for
Cummins Diesel Engines. |
|
|
|
| |
4759 |
Hydraulic Installation
Kit |
For fluid flow
rates up to 40 gallons per minute, with a maximum
working pressure of 100 psi. Special order gasket
5661 is required for use with this base. (The filter
by-pass (25 psid) valve is located in the adapter
base. |
|
|
|
|
| |
4762 |
Remote Mount Spin-On
Filter Bases |
Mounting holes
are conveniently located. Vertical inlet and outlet
ports are 1/2" female N.P.T. Select suitable filter
from listing. |
|
|
|
|
| |
4763 |
Remote Mount Spin-On
Filter Bases |
This remote mount
base may be used in a variety of applications including
lube, fuel, hydraulic and transmission. It features
double inlet and outlet horizontal ports. Two brass
plugs are included for blocking off the unused ports.
Three mounting holes are provided. A variety of filters
may be used from the list. |
|
|
|
|
| |
4764 |
Remote Mount Spin-On
Filter Bases |
This remote mount
base may be used in a variety of applications including
lube, fuel, hydraulic and transmission. It features
double inlet and outlet horizontal ports. Two brass
plugs are included for blocking off the unused ports.
Three mounting holes are provided. A variety of filters
may be used from the list. |
|
|
|
|
| |
4766 |
Remote Mount Spin-On
Filter Bases |
This remote mount
base may be used in a variety of applications including
lube, fuel, hydraulic and transmission. It features
double inlet and outlet horizontal ports. Two brass
plugs are included for blocking off the unused ports.
Three mounting holes are provided. A variety of filters
may be used from the list. |
|
|
|
|
| |
4768 |
Remote Mount Spin-On
Filter Bases |
This remote mount
base may be used in a variety of applications including
lube, fuel, hydraulic and transmission. It features
double inlet and outlet horizontal ports. Two brass
plugs are included for blocking off the unused ports.
Three mounting holes are provided. A variety of filters
may be used from the list. |
|
|
|
|
| |
4770 |
Remote Mount Spin-On
Filter Bases |
This remote mount
base may be used in a variety of applications including
lube, fuel, hydraulic and transmission. It features
double inlet and outlet horizontal ports. Two brass
plugs are included for blocking off the unused ports.
Three mounting holes are provided. A variety of filters
may be used from the list. |
|
|
|
|
